HOME- Vacuum loading system brand: Shini TAIWAN
- Dia. of screw: Φ110mm； L/D of screw: 33:1
- Screw material: Nitride 38GrMoAl
- Max. rotation of screw: 115r/min
- Max. extrusion: 400kg/h
- Barrel heating use aluminum heater, solid relay control the heating
- Barrel heating total power and heating zones: 52.5kw 7zones
- Die-head using built-in stainless steel heating pipe and solid-state relay
- Length of die-head:1000MM
- Effective length:850mm
- Exceed film thickness: 0.07-0.35mm
- Die-head total heating power and heating zones: 18kw 6zones
- Main motor: Siemens AC motor
- Motor power:132kw
Tape stretching line AEG1000
Model AEG1000
Extrusion capacity Max.400kg/h
Die lip width 1000mm
Max. linear speed 450m/min
Extrusion capacity Max.400kg/h
Die lip width 1000mm
Max. linear speed 450m/min
Application
The machine is designed on the basis of PP material, if produce both PP & PE, the buyer should inform the seller in advance.
Each line consists of
Extruder
Haul-off unit/Slitting system
- 1.Haul-off unit
- Water remove plate 2 sets
- Water snap system 1 set motor power 3kw
- Film lifting system 1 set motor power 4kw
- Water absorb system 2 sets
- Water absorb motor power 3kw. 2.Slitting system
- Slitting shaft type: 6 side blade rotate
- Specification: non-stop changing blade, can be adjust up & down, and right & left.
Drawing unit
- Roller size: Φ420mm (Bearing SKF)
- Roller surface deal: Plate Cr, mirror deal (Equip safety cover)
- Stretching 4 roller power: 18.5kw
- Max. Line speed: 450m/min
- Water chiller two roller motor power: 5.5kw
- Heating power of mold temperature controller: 24kw
- Oil heating two roller motor power: 5.5kw
Hot air oven
- Oven Size：6000X1400mm
- Effective using width: 1150mm
- Heating power: 70kw
- Fan power: 5.5kw×2sets
- Fan rotation speed: 1440r/min
- Up oven pneumatic open
- Heating using built-in heating pipe and power regulator
ATA600DH Winder
- According to different yarns, choose different winding parameters by setting of user independently, perfect spindles, wide usage;
- Adopting continuous winding technique, make sure the constant tension of the whole spindle, reduce yarn breakage rate in circular loom, reduce deviation of fabric width;
- Max. Winding Diameter up to 180 mm, reduce times to change spindles strongly, save labors, increasing usage time of warp yarn;
- Simple structure, little amounts of fast moving spare parts, high intellectualization.
Technical Parameter
| Working width | 850mm |
| Die lip width | 1000mm |
| Die material | Mold steel 4Cr13, surface by hard chrome treatment |
| Net film width | Approx.130mm |
| Extruder power | 132Kw AC motor |
| Extrusion capacity | Max.400kg/h |
| Screw speed | 20-115r/min |
| Screw | Screw dia. 110mm and L/D 33:1 |
| Screw and barrel material | 38 CrMoAlA Nitrogen treatment |
| Stretching ratio | 4-10 |
| Hot air oven length | 6000mm |
| Stretching roller size | Φ420×1350mm |
| Max. linear speed | 450m/min |
| Rated power | 350kw |
| Power consumption | 180kw |
| Winder number | 160spindles (This unit standard deploy) |
| Dimension | 42000x3300x3000mm |
| Weight | Around 30Tons |
Share to：
